Thunder Road Bikes

Home of the Classic Motorbike.

VENHILL BRAIDED BRAKE LINES AND FITTINGS

Perfect for your classic motorbike, simply measure the total length of the brake line that you require including end fittings. Choose the end fitting you need from the section below, then choose the length of hose you need. Both end fittings will take up approx 40mm, so select a length of braided hose approx 40mm shorter. E.G  Your brake line is 440 mm long including the end fittings. Select the end fittings you need then a 400mm long braided hose. This will make up your 440mm.

Choice of colours too!

All  Venhill Powerhose Plus lines are factory made, tested and approved by TUV and DOT. Lines use the highest quality Teflon tube with Stainless steel over braid. The lines are covered in clear PVC as standard. Coloured PVC can be specified as required. The Powerhose Plus fittings simply screw on to the lines stainless steel 1/8 BSP swivel nuts. This gives perfect alignment.

Best of all!  Thunder Road Bikes will send them to you P&P free if you are in the UK and your order is over £50.00

If you are outside the UK, or your order is less than £50.00  please email me for a shipping price.

Sales@thunderroadbikes.com